Sharp AL-1633 ユーザーズマニュアル
57
TROUBLESHOOTING
5
B. Misfeed in the fusing area
1
Push gently on both ends of the front
cover and open it.
cover and open it.
2
Turn the roller rotating knob in the
direction of the arrow.
direction of the arrow.
3
Carefully remove the misfed paper.
Lower the fusing unit release levers to
allow easier removal.
Lower the fusing unit release levers to
allow easier removal.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
4
Lift the fusing unit release levers, to
return them to their operating
position.
return them to their operating
position.
5
Close the front cover and side cover.
The misfeed indicator
(
(
) will go out.
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
• Do not touch the drum cartridge (green
portion) when removing the misfed paper.
Doing so may damage the drum and cause
smudges on copies.
Doing so may damage the drum and cause
smudges on copies.
• Be careful about unfixed toner on the
misfed paper soiling your hands or clothes.
Roller rotating knob
Fusing unit
release lever
release lever
Warning
Caution
• When closing the front cover, gently hold
both ends.
• When closing the side cover, press on the
handle.
• If the misfeed indicator (
) does not stop
blinking, check for torn pieces of paper in
the machine.
the machine.
Note
AL-1633_1644_EX.book 57 ページ ２００３年１０月２３日 木曜日 午後８時２１分