Sharp MX-FX12 ユーザーズマニュアル
46
USING THE MACHINE WITH AN
ANSWERING MACHINE
ANSWERING MACHINE
USING AN ANSWERING MACHINE
When your answering machine is connected to the machine and receiving a voice message, you can record the
message after the answering machine rings. When coming a fax, the machine will automatically receive it after the
answering machine rings. To enable this function, select the A.M. mode of the Reception Mode (see "SELECTING
THE RECEPTION MODE" on page 26).
message after the answering machine rings. When coming a fax, the machine will automatically receive it after the
answering machine rings. To enable this function, select the A.M. mode of the Reception Mode (see "SELECTING
THE RECEPTION MODE" on page 26).
ANSWERING MACHINE BACKUP
There may be times when the memory on your answering machine becomes full, or
when the answering machine itself malfunctions. It is still possible to receive faxes even under these conditions, by
turning on the Auto Receive function. The machine will automatically answer all calls after five rings. To use this
function, follow the procedure below.
when the answering machine itself malfunctions. It is still possible to receive faxes even under these conditions, by
turning on the Auto Receive function. The machine will automatically answer all calls after five rings. To use this
function, follow the procedure below.
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "6:A.M. MODE" appears, and
then press the [OK] key.
then press the [OK] key.
3
Press the [
] key (
) or [
] key (
)
until "1:AUTO RECEIVE" appears, and
then press the [OK] key.
then press the [OK] key.
4
Press the [
] key (
) or [
] key (
)
to select "1:ON" or "2:OFF".
Select "1:ON" to enable
the function.
Select "2:OFF" to disable
the function.
the function.
Select "2:OFF" to disable
the function.
5
Press the [OK] key.
6
Press the [MENU] key.
Press the [MENU] key to
exit.
exit.
"6:A.M. MODE"
Selection
"1:AUTO RECEIVE"
Selection
If you are using Auto Receive, make sure that your answering machine is set to answer on four rings or less.
Otherwise, the machine will take over all calls, preventing callers from leaving voice messages.
Otherwise, the machine will take over all calls, preventing callers from leaving voice messages.
Note