Sharp MX-FX12 ユーザーズマニュアル

TROUBLESHOOTING

Problem

Cause and solution

Page

Dialing cannot be done.

The telephone line cord is not correctly connected to the
machine and the wall telephone socket.

→ Make sure the telephone line cord is securely connected.

Start

Guide

No transmission takes place.

The receiving machine is out of paper.

→ Check with the operator of the receiving machine.

The receiving machine does not support the G3 standard.

→ Check with the operator of the receiving machine.

An error is displayed.

→ Check the display of the machine.

Nothing is printed at the
receiving end.

If a blank sheet of paper is output together with a normally
received fax, the machine's paper size setting may be different
from the size of paper actually loaded in the machine.

→ Make sure that the paper size setting matches the size of paper

loaded in the machine.

A distorted image is received at
the other end.

Noise on the line may cause a distorted image. Try sending the
fax again, or make a copy on your machine and see if the copy
is distorted.

→ If the image is still distorted, consult the retailer or dealer where

you bought the machine.

The received original is faint.

The transmitting machine may be using a light contrast setting.

→ Ask the operator of the transmitting machine to send the fax using

a darker contrast setting.

Received images are distorted.

Noise on the line may cause a distorted image.

→ Ask the operator of the transmitting machine to send the fax

again.

The TD cartridge may be running out of toner.

→ Replace the TD cartridge.

Operation

Guide

(for

MX-B201/

MX-B201

If your problem cannot be solved by carrying out the instructions in the Check and Remedy column above, please
contact your authorized SHARP dealer.

Note