Sharp UX-B800SE ユーザーズマニュアル

7. Option/Pr

int 

Settings

The option settings and print settings 
allow you to customize the operation of 
the machine to better suit your needs. 

The option settings are related to 
general operation. The print settings are 
related to printing.

The  option settings and print settings 
have been initially configured at the 
factory. To change a setting, follow the 
steps below to display the desired 
setting, and then change the setting as 
explained in the tables that follow.

Press , 

then  

until 

[OPTION SETTING] or [PRINT SET-
UP] 

appears

.

Press , 

then  

repeatedly 

until the desired setting appears. 

•

The option settings and print settings 
are described in the tables below 
and on the following pages

.

Enter a selection for the setting by 
pressing the number keys as 
explained in the table.

After entering a selection, the 
subsequent option/print setting will 
appear in the display. To exit the 

settings, press 

.

Make a selection for the displayed setting as explained below. 
This is done in step 3 of the above procedure.

FINE PRIORITY This is used to change the default resolution for faxing from 

STANDARD to FINE. Press 

 (YES) to select FINE, or 

 

(NO) to select STANDARD. 
Initial setting: NO (STANDARD)

This is used to set the number of rings on which the machine 
answers calls when the reception mode is set to AUTO. Enter any 
number from 2 to 5.
Initial setting: 4 rings.
Note: If you have turned on Distinctive Ring (page 39), the 
machine will answer after 2 rings regardless of this setting.