Sharp UX-B800SE ユーザーズマニュアル

Any dirt on the scanning glass and 
rollers will degrade the quality of 
transmitted documents and copies. 
Clean these frequently as explained 
below.

♦

If the document does not feed or 
double-feeds occur, use a cloth 
moistened with water to wipe the 
rollers.

Open the 
cover.

Rotate the lever so that it points 
straight up (

➊) and pull it up (➋)

.

Pull the white roller out to the right. 
Wipe the scanning glass, rollers, 
and rubber sheet  with a clean cloth 
or swab.

•

Do not wipe off the grease on the 
ends of the white roller.

•

Make sure that all dirt and stains 
(such as correcting fluid) are 
removed. Dirt and stains will cause 
vertical lines on transmitted images 
and copies.

•

If the scanning glass is difficult to 
clean, try moistening the cloth with 
isopropyl alcohol or denatured 
alcohol. Take care that no alcohol 
gets on the rollers.

•

Do not press down on the two front 
rollers.

•

Use a cloth moistened with alcohol 
to wipe off any splattered ink on the 
inside of the compartment or the 
underside of the cover. (Do not wipe 
the rollers or rubber sheet with the 
alcohol-moistened cloth.)

Replace the white roller, inserting 
the left end first. Push the lever 
down and rotate it back down.

Rollers

Rubber sheet

White roller

Scanning 
glass