Sharp AL-1661CS ユーザーズマニュアル
22
INITIAL SETTINGS
8
Press the [ENTER] key.
9
Press the [
] key (
) or [
] key (
)
until "2:ENTRY MODE" appears, and
then press the [ENTER] key.
then press the [ENTER] key.
"STORED" will appear in the display.
10
Press the [CLEAR ALL] key (
).
Press the [CLEAR ALL]
key (
key (
) to exit.
SETTING THE DATE AND TIME
The date and time that appear in the display are printed at the top of each page you transmit. Set the date and time
by pressing the keys on the operation panel as shown below.
If you enter an incorrect number, press the [CLEAR] key (
by pressing the keys on the operation panel as shown below.
If you enter an incorrect number, press the [CLEAR] key (
) and re-enter the number.
The time can be displayed in 12-hour or 24-hour format. "Month/Day/Year", "Day/Month/Year" or "Year/Month/Day"
can be selected for the order of display of the date.
can be selected for the order of display of the date.
Use the following procedure to set the date and time:
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "2:ENTRY MODE" appears, and
then press the [ENTER] key.
then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
until "2:DATE&TIME SET" appears,
and then press the [ENTER] key
and then press the [ENTER] key
4
Enter the year, month, and day with
the numeric keys and then press the
[ENTER] key.
the numeric keys and then press the
[ENTER] key.
5
Enter the time with the numeric keys.
6
Press the [
] key (
) or [
] key (
)
to select "AM" or "PM".
When 24-hour format is
selected, do not perform
this step.
selected, do not perform
this step.
7
Press the [ENTER] key.
8
Press the [CLEAR ALL] key (
).
Press the [CLEAR ALL]
key (
key (
) to exit.
"2:ENTRY MODE"
Selection
"2:ENTRY MODE"
Selection
"2:DATE&TIME SET"
Selection