Sharp AL-1556 ユーザーズマニュアル

When toner is low, the error indicator will light up and "TONER IS LOW" will appear 
in the display. For information on purchasing a new TD cartridge, see "ABOUT 
SUPPLIES AND OPTIONS" (p.91). If copying is continued while the indicator is lit, 
copies will gradually become lighter  until the toner runs out. When the toner runs 
out, the machine will stop operating, the error indicator will blink, and "REPLACE 
THE TD CARTRIDGE" will appear in the display. Follow the procedure below to 
replace the TD cartridge.

To open the bypass tray, see "Loading paper in the bypass tray" (p.22). To 
open the side cover and front cover, see "INSTALLING THE TD 
CARTRIDGE" (p.14).

• After the machine stops, it may be possible to make a few more 

copies by taking the TD cartridge out of the machine, shaking it 
horizontally, then reinstalling it. If copying is not possible after this 
operation, replace the TD cartridge.

• During a long copy run of a dark original, "TONER 

REPLENISHMENT IN PROGRESS" appears in the display, and the 
machine may stop even though toner is left. The machine will feed 
toner up to 2 minutes and then the ready indicator will light up. Press 
the [START] key (

) to resume copying.

In order to help preserve the global environment, we recycle used TD 
cartridges. Please read "COPIER TONER CARTRIDGE RECYCLING 
PROGRAM", which is enclosed in the new TD cartridge package.

When closing the covers, be sure to close the front cover securely and 
then close the side cover. If the covers are closed in the wrong order, 
the covers may be damaged.

Lock release button