Sharp MX-M753N ユーザーズマニュアル
8-4
Making a copy of a non-standard size original
The procedure for making a copy of a payment slip or other non-standard size
original is explained below.
The "Centring" special mode of copy mode can be selected to position the copied
image in the centre of the paper.
original is explained below.
The "Centring" special mode of copy mode can be selected to position the copied
image in the centre of the paper.
FREQUENTLY ASKED QUESTIONS
X
Y
Original
Size Input
OK
OK
Cancel
(25-432)
mm
mm
200
150
(25-297)
mm
mm
From the base screen of copy mode,
touch [Original] then [Size Input].
touch [Original] then [Size Input].
If the X dimension
(width) of the
document is less than
140 mm (5-1/2") or
the Y dimension
(height) is less than
131 mm (5-1/8"),
place the original on
the document glass.
For a thin original,
use "Slow Scan
Mode".
(width) of the
document is less than
140 mm (5-1/2") or
the Y dimension
(height) is less than
131 mm (5-1/8"),
place the original on
the document glass.
For a thin original,
use "Slow Scan
Mode".
1 Place the originals.
2 Enter the original size.
Paper Select
Cancel
Plain
Pre-Punched
Heavy Paper
Pre-Printed
Colour
Transparency
Recycled
Thin Paper
Tab Paper
Letter Head
Labels
106 - 209 g/m2 (28 lbs.bond. - 110 lbs.index)
Bypass Tray Type/Size Setting
Select the paper type.
1
2
Paper Select
OK
3 Place paper in the bypass tray.
4 Select the bypass tray.
From the base screen of copy mode,
touch [Paper Select] and then "Bypass
tray paper type".
touch [Paper Select] and then "Bypass
tray paper type".
Type : Recycled
Size : A4
Size : A4
The bypass tray is used here to copy
onto paper that is not loaded in any of
the paper trays of the machine.
onto paper that is not loaded in any of
the paper trays of the machine.