Sharp MX-M753N ユーザーズマニュアル

Are any inserter covers open?

Close all covers.

"Disabling of inserter" is enabled in the 
administrator settings.

Check with your administrator.
Check the administrator settings and disable "Disabling 
of inserter".

A paper misfeed message appears.

Remove the misfed paper.

☞

" (page 8-8)

The [START] key light is not illuminated.

Make sure that the punch or staple key has been 
selected on the operation panel of the inserter.

☞

1. BEFORE USING THE MACHINE "

The paper is curled or damp.

Do not use curled or folded paper. When the inserter is 
not going to be used for a long time, remove the paper 
from the inserter, place it in a bag so that it does not 
absorb moisture, and store it in a cool and dark place.

Do the size and orientation of the loaded 
paper match the paper size and 
orientation set in "Paper Tray Settings"?

Make sure paper size and orientation set in "Paper Tray 
Settings" match the size and orientation of the loaded 
paper.

➞ System Settings >"Paper Tray Settings">"Tray 

Settings"

Are multiple transparency films loaded 
on the tray of the inserter at once?

Load one sheet on the tray at a time.
Depending on the type of transparency film, a double 
feed may occur.

Were the size and orientation of the 
paper for the inserter set as explained in 
"Paper Tray Settings"?

To ensure that the correct paper (size and orientation) is 
loaded in the inserter, the machine indicates the current 
paper size setting each time paper is placed in the 
paper tray.