Sharp AL-1655CS ユーザーズマニュアル

 *

1

The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", 

however, the printing speed does not increase considerably.

Setting codes
(factory default

setting appears

in bold)

1

FORCED 
OUTPUT

1: ON
2: OFF

When this function is enabled, 
printing in printer mode will 
automatically continue using a 
different size of paper if the 
specified size of paper runs out 
in all trays. This feature does 
not function in copy mode.

2

USB 2.0 MODE 
SWITCH *

1

1: FULL-SPEED
2: HI-SPEED

This sets the USB 2.0 data 
transfer speed. To obtain the 
fastest speed when using the 
USB 2.0 connector, first verify 
that your computer meets the 
system requirements (operating 
system and driver), and then 
use this program to change the 
USB 2.0 mode to "Hi-Speed". 
Note that the setting should not 
be changed while running a 
TWAIN driver. (For the system 
requirements, see "System 
requirements for USB 2.0 (Hi-
Speed mode)" (p.59).)

3

AUTO TRAY 
SWITCH

1: ON
2: OFF

• If the paper runs out during 

printing and there is paper of 
the same size in another tray, 
this function automatically 
switches to that tray 
(excluding the bypass tray). 
The function can be disabled.

AL-1655CS.book  68 ページ  ２００４年８月２２日　日曜日　午後６時４４分