Sharp AR-M207 ユーザーズマニュアル
38
TROUBLESHOOTING AND MAINTENANCE
CLEANING THE TRANSFER CHARGER
If white or black lines appear in copies or the image is blotchy, the transfer charger may be dirty. Follow the steps
below to clean the charger.
below to clean the charger.
1
Turn the power switch off.
2
Open the bypass tray and the side
cover.
cover.
3
While lifting the handle, gently pull out
tray 1.
tray 1.
4
Take out the charger cleaner.
5
Place the charger cleaner on the
transfer charger and gently slide the
cleaner in the direction indicated by
the arrow two or three times.
transfer charger and gently slide the
cleaner in the direction indicated by
the arrow two or three times.
If the sheet metal on the
transfer charger is smudged
with toner, wipe it with a soft,
clean cloth.
transfer charger is smudged
with toner, wipe it with a soft,
clean cloth.
6
Return the charger cleaner to its
original position.
original position.
7
Close the tray and side cover.
8
Turn the power switch to the "ON"
position.
position.
Charger
cleaner
cleaner
Slide the charger cleaner from one end to
the other end along the groove of the
transfer charger. If the cleaner is stopped it
reaches the other end or if the direction of
movement is reversed, smudges may
appear on copies.
the other end along the groove of the
transfer charger. If the cleaner is stopped it
reaches the other end or if the direction of
movement is reversed, smudges may
appear on copies.
Note
Charger
cleaner
cleaner