Sharp AR-M207 ユーザーズマニュアル
55
COPY FUNCTIONS
4
7
Press the
key.
The vertical ratio can now be selected.
8
Set the vertical ratio with the [
], [
],
[
], or [
] keys.
A preset ratio can be selected
with the [
with the [
] or [
] keys. The
ratio can be adjusted in
increments of 1% with the [
increments of 1% with the [
]
or [
] keys.
To change the copy ratio in the
horizontal direction again, press
the
horizontal direction again, press
the
key.
9
Press the [OK] key.
You will return to the base
screen.
screen.
10
Make sure that the desired paper tray
is selected.
is selected.
If the auto paper select function has been
enabled, the appropriate copy paper size will be
automatically selected based on the original size
and the selected copy ratios. Image rotation will
take place if necessary.
enabled, the appropriate copy paper size will be
automatically selected based on the original size
and the selected copy ratios. Image rotation will
take place if necessary.
11
Select any other copy settings as
needed and press the [START] key
(
needed and press the [START] key
(
).
@.-_
FUNCTION
ACC. #-C
READ-E
XY ZOOM
121% ZOOM
121% ZOOM
100%
X: 121%
95% Y: 100%
[ ]:X Y
[ ]:X Y
OK
Ready to copy.
8 x11R
X121% Y 99%
8 x14
8 x14
AUTO
AUTO
1
2
1
2
If the [ZOOM] key is pressed when XY zoom
ratios are set, the following screen appears.
ratios are set, the following screen appears.
To cancel the XY zoom ratio settings, select
"OFF" and press the [OK] key.
To adjust the XY zoom copy ratios, select
"ADJUST" and press the [OK] key.
"OFF" and press the [OK] key.
To adjust the XY zoom copy ratios, select
"ADJUST" and press the [OK] key.
WXYZ
@.-_
READ-END
Note
XY ZOOM
ADJUST
OFF