Sharp AL-1215 ユーザーズマニュアル
53
6
A: When copying in a one-sided to two-sided mode:
Use the original to copy key to select the desired one-sided to two-sided
copying mode (Turn on Long Edge or Turn on Short Edge). See the
illustrations on page 52.
copying mode (Turn on Long Edge or Turn on Short Edge). See the
illustrations on page 52.
B: When copying in the two-sided to two-sided mode:
Use the original to copy key to select the two-sided to two-sided copying
mode. The originals must be set in the RSPF before this mode can be set
in step 3 on page 48.
mode. The originals must be set in the RSPF before this mode can be set
in step 3 on page 48.
C: When copying in the two-sided to one-sided mode:
Use the original to copy key to select the two-sided to one-sided copying
mode. The originals must have been set in the RSPF in step 3 on page 48.
mode. The originals must have been set in the RSPF in step 3 on page 48.
3
Select the copy settings. See "SET THE COPY QUANTITY"
(p.49), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.49),
and "REDUCTION/ENLARGEMENT/ZOOM" (p.51).
(p.49), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.49),
and "REDUCTION/ENLARGEMENT/ZOOM" (p.51).
Using the original table
If you are using the original table, copying is only possible in one sided to
two-sided mode ("A" above).
If you are using the original table, copying is only possible in one sided to
two-sided mode ("A" above).
1
Press the start (
) key.
The original is scanned into the unit's memory and the number of the
copy quantity blinks in the display.
copy quantity blinks in the display.
2
Place the original that you wish to copy onto the rear side of the
paper, and press the start (
paper, and press the start (
) key again.
Copying begins.
Using the RSPF
Press the start (
Press the start (
) key. Copying begins in the selected two-sided copy mode.
Selecting the tray
Press the tray select (
) key.
Each time you press the tray select (
) key, the location
indicated by the paper feed location indicator changes in
the following order: paper tray 1, paper tray 2, multi-
bypass tray.
the following order: paper tray 1, paper tray 2, multi-
bypass tray.
A
B
C
AL-1215_1530-1551CS.book 53 ページ ２００２年８月７日 水曜日 午前９時３４分