Sharp AL2021 ユーザーズマニュアル
6
53
SCANNING USING THE KEYS ON THE MACHINE
When scanning is performed by this method, the application that has been set in
Button Manager will automatically start and the scanned image will be pasted into
the application. For the steps to allocate applications using the Button Manager or
other settings, see "Button Manager settings" (p.55).
Button Manager will automatically start and the scanned image will be pasted into
the application. For the steps to allocate applications using the Button Manager or
other settings, see "Button Manager settings" (p.55).
Scanning from the operation panel of the machine
1
Press the SCAN (
) key.
The unit enters scan mode.
2
Place the original you wish to scan on the document glass/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.26).
(p.26).
3
Press the right copy quantity
key to display the number of
the application that you wish to
use for scanning.
key to display the number of
the application that you wish to
use for scanning.
The application numbers are initially
as follows.
as follows.
To check the settings, see "Button Manager settings" (p.55) and then open
the settings window of the Button Manager.
the settings window of the Button Manager.
• Scanning is not possible during a copy job.
• If the SCAN (
• If the SCAN (
) key is pressed during a print job, the scan job will
be stored.
• When scanning an original that has been placed in the SPF, only one
original can be placed unless you are using Sharpdesk.
Application
number
Application launched
SC1
Sharpdesk
SC2
Email
SC3
FAX
SC4
OCR
SC5
Microsoft Word
SC6
Filing