Sharp AL2021 ユーザーズマニュアル

ページ / 91
8
70
4
Close the front cover and then the side cover by pressing the 
round projections near the side cover open button. The indicator 
(
) will go out and the start (
) indicator will light up.
DRUM CARTRIDGE REPLACEMENT
The useful life of the drum cartridge is approximately 18,000 copies*. When the internal 
counter reaches approximately 17,000 copies, the drum replacement required (
indicator will light up indicating that replacement of the drum cartridge will be needed 
soon. For more information on purchasing the drum cartridge, see "ABOUT SUPPLIES 
AND OPTIONS" in the Start Guide. When the indicator begins to blink, the unit will stop 
operating until the cartridge is replaced. Replace the drum cartridge at this time.
*Based on copying onto A4 size paper at 5% toned area.
1
Remove the TD cartridge (see step 1 and 2 in "TD CARTRIDGE 
REPLACEMENT" (p.69)).
2
Hold the drum cartridge handle and 
gently pull the cartridge out. Dispose 
of the old drum cartridge in 
accordance with local regulations.
3
Remove the new drum cartridge from 
the protective bag and remove the protective cover from the 
cartridge. Then gently install the new drum cartridge.
When closing the covers, be sure to close the front cover securely and 
then close the side cover. If the covers are closed in the wrong order, 
the covers may be damaged.
Do not remove the protective cover on the drum portion (black paper) of 
a new drum cartridge before use. The cover protects the drum against 
external light.
Do not touch the surface of the drum (green portion) of the 
cartridge. Doing so may cause smudges on the copies.
Drum cartridge handle