Sharp AL-1555 ユーザーズマニュアル
33
4
How to print
1
Make sure that the paper of the desired size and type is loaded
in the tray.
in the tray.
The procedure for loading paper is the same as for loading copier papier.
See "LOADING PAPER" (p.14)
See "LOADING PAPER" (p.14)
2
Open the document you intend to print, and select "Print" from
the application's "File" menu.
the application's "File" menu.
3
Make sure that "SHARP AL-xxxx" (where xxxx is the model
name of your unit) is selected as the current printer. If you
intend to change any print setting, click the "Preferences"
button to open the setting dialog.
name of your unit) is selected as the current printer. If you
intend to change any print setting, click the "Preferences"
button to open the setting dialog.
On Windows 95/98/Me/NT 4.0, click the "Properties" button.
On Windows 2000, the "Properties" button does not appear. Set your
preferences by switching the tab in the "Print" dialog box.
On Windows 2000, the "Properties" button does not appear. Set your
preferences by switching the tab in the "Print" dialog box.
4
Specify the print settings including the number of copies,
media type, and print quality, and then click the "Print" button
to start printing.
media type, and print quality, and then click the "Print" button
to start printing.
On Windows 95/98/Me/NT 4.0, click the "OK" button to start printing.
For details on print settings, see the online manual or the help file for the
printer driver.
For details on print settings, see the online manual or the help file for the
printer driver.
When using the single bypass
After
After
appears in the display, wait until the Paper feed location
indicator for the single bypass illuminates and insert the paper. The machine
will automatically draw in the paper and begin printing.
will automatically draw in the paper and begin printing.
•
If copying is being performed when printing is started, copying will
continue. After copying is complete, printing will be executed when the
clear (
) key is pressed twice, the ON LINE key is pressed to switch
the unit to the online state or approximately 60 seconds (auto clear
time)* elapse.
* The auto clear time varies with a user program setting. See "USER
PROGRAMS" (p.55).
•
Preheat mode and auto power shut-off mode will be canceled when
printing is started.
•
If the paper size specified from the software application is larger than
the paper size in the printer, part of the image that is not transferred to
the paper may remain on the surface of the drum. In this case, the
backside of the paper may become dirty. If this occurs, change to the
correct size paper and print two or three pages to clean the image.
•
If you start a print job while a scan job is in progress, the print data will
be stored in the unit's memory. When the scan job is completed,
printing will begin.
When printing from the single bypass, configure the settings in the printer
driver first, execute printing, and then load the paper.
driver first, execute printing, and then load the paper.