Sharp AL-2051 ユーザーズマニュアル
117
TRANSMISSION METHODS FOR SCAN TO E-MAIL
The e-mail address for a Scan to E-mail transmission can be entered manually or
selected from e-mail addresses stored on an LDAP server.
selected from e-mail addresses stored on an LDAP server.
Sending an image by entering an e-mail address manually
1
Press the [MODE SELECT] key to select
scanner mode.
scanner mode.
The "SCAN" indicator lights up to indicate that
scanner mode is selected.
scanner mode is selected.
2
Make sure that the "SCAN USING: USB/
NETWORK" is shown on the display. Then
press [OK] to enter Scan to USB and
Network Scan mode.
NETWORK" is shown on the display. Then
press [OK] to enter Scan to USB and
Network Scan mode.
(The initial display will be "SCAN USING: SCAN
TO USB".)
TO USB".)
3
Place the original in the document feeder tray or on the
document glass.
document glass.
For information on how to place the original, see "Image orientation and
standard original loading orientation" (p.120).
standard original loading orientation" (p.120).
4
Select "INPUT ADDRESS" using the [
]
key (
) or [
] key (
) and then press
the [OK] key.
If "INPUT ADDRESS" does not appear, make sure
that "Scan to ad-hoc E-mail" is enabled in the Web
page (p.110).
that "Scan to ad-hoc E-mail" is enabled in the Web
page (p.110).
5
Enter the destination e-mail address and
press the [OK] key.
press the [OK] key.
To enter characters, see "How to enter characters"
(p.121).
(p.121).
6
Press the [
] key (
) or [
] key (
) to select the original
size and then press the [OK] key.
The original size changes as follows each time the [
] key (
) or [
]
key (
) is pressed:
"A4"
→ "B5" → "A5" → "8.5x14" → "8.5x13" → "8.5x11" → "8.5x5.5".
SCAN USING:
USB/NETWORK
USB/NETWORK
SCAN USING:
INPUT ADDRESS
INPUT ADDRESS
INPUT ADDRESS:
XXXXX.XXXXX.com
XXXXX.XXXXX.com