Sharp AL-2051 ユーザーズマニュアル
143
TROUBLESHOOTING THE MACHINE
The following problems are related to the general operation of the machine and
copying.
copying.
Problem
Cause and solution
Page
The machine does not
operate.
operate.
The machine is not plugged into a
power outlet.
power outlet.
→ Plug the machine into a grounded outlet.
-
Power switch OFF.
→ Turn the power switch ON.
The power save indicator is blinking.
Indicates that the machine is warming
up.
Indicates that the machine is warming
up.
→ Copies cannot be made until the
machine has finished warming up.
-
The front cover or the side cover is not
completely closed.
completely closed.
→ Close the front cover or the side cover.
-
The machine is in auto power shut-off
mode.
mode.
→ In auto power shut-off mode, all lights
are off except the power save indicator.
Press the [START] key (
Press the [START] key (
) to resume
normal operation.
Copies are too dark or
too light.
too light.
Select the correct original type for the
original.
original.
→ Select AUTO (
) with the
[EXPOSURE
(
)
] key or press the
[
] key (
) or [
] key (
) to
manually select an appropriate
exposure.
exposure.
→ If the copy is too light or too dark even
though AUTO (
) was selected with
the [EXPOSURE
(
)
] key, adjust the
automatic exposure level.
Blank copies.
The original is not placed face up in the
RSPF or face down on the document
glass.
RSPF or face down on the document
glass.
→ Place the original face up in the RSPF
or face down on the document glass.