Sharp AL-2051 ユーザーズマニュアル

157

TD (TONER/DEVELOPER) CARTRIDGE REPLACEMENT

When toner is low, the error indicator will light up and "TD CARTRIDGE IS NEAR
EMPTY" will appear in the display. For information on purchasing a new TD
cartridge, see START GUIDE. If copying is continued while the indicator is lit, copies
will gradually become lighter until the toner runs out. When the toner runs out, the
machine will stop operating, the error indicator will blink, and "REPLACE THE TD
CARTRIDGE" will appear in the display. Follow the procedure below to replace the
TD cartridge.

Open the bypass tray, and
then open the side cover
while pressing the side
cover open button.

Push gently on both sides of
the front cover to open the
cover.

• After the machine stops, it may be possible to make a few more

copies by taking the TD cartridge out of the machine, shaking it
horizontally, then reinstalling it. If copying is not possible after this
operation, replace the TD cartridge.

• During a long copy run of a dark original, "TONER

REPLENISHMENT IN PROGRESS" appears in the display, and the
machine may stop even though toner is left. The machine will feed
toner up to 2 minutes and then the ready indicator will light up. Press
the [START] key (

) to resume copying.