Sharp AL-2051 ユーザーズマニュアル
71
PRINTER UTILITY
Printer Status Monitor (for general users)
"Printer Status Monitor" is on the "Software CD-ROM".
This allows the user to check on the computer screen whether or not the machine is
able to print.
It provides information on error states such as paper misfeeds and shows the
configuration of the machine (number of trays, etc.) by means of illustrations.
Available paper sizes and paper remaining are also indicated.
This allows the user to check on the computer screen whether or not the machine is
able to print.
It provides information on error states such as paper misfeeds and shows the
configuration of the machine (number of trays, etc.) by means of illustrations.
Available paper sizes and paper remaining are also indicated.
Before using the Printer Status Monitor
Note the following points before using the Printer Status Monitor.
Printing via a server
When the first print job is executed after starting up the Printer Status Monitor, the
machine's IP address is automatically set in the Printer Status Monitor.
machine's IP address is automatically set in the Printer Status Monitor.
Direct printing without a server
Install and configure the software as explained in "INSTALLING THE PRINTER
DRIVER" in the software setup guide for network printer. (This is not necessary if the
software has already been installed and configured.)
DRIVER" in the software setup guide for network printer. (This is not necessary if the
software has already been installed and configured.)
• In order to use the Printer Status Monitor, the machine must be
connected to a network.
• To install the Printer Status Monitor, see page 51.