OKI MC160n ユーザーズマニュアル
34
Control Panel and Configuration Menu
TONER REMAINING
A general estimate of the amount of toner remaining in the toner cartridges can
be viewed.
be viewed.
"
If the Enter key is held down for at least 2 seconds while the screen
described above is displayed, the configuration page will be printed.
described above is displayed, the configuration page will be printed.
T/C CHANGE
REPLACE MODE
Switches the machine to the REPLACE MODE.
This mode is used when replacing a toner car-
tridge.
This mode is used when replacing a toner car-
tridge.
For details on replacing a toner cartridge, refer
to “Replacing a Toner Cartridge” on page 154.
to “Replacing a Toner Cartridge” on page 154.
"
To return to normal operation mode from
REPLACE MODE, press the Stop/Reset
key.
REPLACE MODE, press the Stop/Reset
key.
EJECT MODE
Switches the machine to the EJECT MODE.
This mode is used when replacing all toner car-
tridges at the same time.
This mode is used when replacing all toner car-
tridges at the same time.
For details on replacing all toner cartridges,
refer to “Replacing All Toner Cartridges at the
Same Time” on page 161.
refer to “Replacing All Toner Cartridges at the
Same Time” on page 161.
"
To return to normal operation mode from
EJECT MODE, press the Stop/Reset
key.
EJECT MODE, press the Stop/Reset
key.