Panasonic KX-FPG381 ユーザーズマニュアル

ページ / 106
10. Help
86
For Fax Advantage assistance, call 1-800-435-7329.
10.3.4 Fax – sending
I cannot send documents.
L
The other party’s fax machine is busy or has 
run out of recording paper. Try again.
L
The other party’s machine is not a fax 
machine. Check with the other party.
L
The other party’s fax machine rings too many 
times. Send the fax manually (page 50).
I cannot send a fax overseas.
L
Use the overseas transmission mode 
(feature #23 on page 69).
L
Add two pauses at the end of the telephone 
number or dial manually.
The other party complains that letters on 
their received document are distorted or not 
clear.
L
If your line has special telephone services 
such as call waiting, the service may have 
been activated during fax transmission. 
Connect the unit to a line that does not have 
these services.
L
An extension telephone on the same line is 
off the hook. Hang up the extension 
telephone and try again.
L
Try copying the document with this unit. If the 
copied image is clear, there may be 
something wrong with the other party’s 
machine.
The other party complains that smudges or 
black lines appear on their received 
document.
L
The glass or rollers are dirty. Clean them 
(page 90).
10.3.5 Fax – receiving
I cannot receive documents.
L
When you have a single telephone line and 
subscribe to a voice mail service, you must 
also subscribe to a Distinctive Ring service 
(page 56).
L
The film is empty. Replace the film with a new 
one (page 14).
I cannot receive documents automatically.
L
The receiving mode is set to TEL mode. Set 
to TAM/FAX mode (page 54) or FAX ONLY 
mode (page 55).
L
The time taken to answer the call is too long. 
Decrease the number of rings in feature #06 
(page 69).
L
The greeting message is too long. Record a 
shorter message (page 61).
The display shows “CONNECTING.....”, but 
faxes are not received.
L
The incoming call is not a fax. Change the 
receiving mode to TAM/FAX mode (page 54) 
or TEL mode (page 53).
A blank sheet is ejected.
L
If a blank sheet is ejected after the received 
document is printed out, the receiving 
reduction rate is not programmed correctly. 
Program the proper rate in feature #36 (page 
70).
L
The other party placed the document in their 
fax machine facing the wrong way. Check 
with the other party.
A white line or a smudge appears on your 
recording paper.
L
The glass or rollers are dirty. Clean them 
(page 90).
The printing quality is poor.
Please do not reuse the ink film!
Please use genuine Panasonic replacement 
film. Refer to page 9 for further details.
L
The other party sent a faint document. Ask 
them to send a clearer copy of the document.
L
The thermal head is dirty. Clean it (page 91).
L
Some paper has instructions recommending 
which side to print on. Try turning the 
recording paper over.
L
You may have used paper with a cotton 
and/or fiber content that is over 20%, such as 
letterhead or resume paper. We recommend 
smooth paper such as “Hammermill Jet Print” 
for clearer printing.
I cannot receive documents by pressing 
{*}{#}{
9} on the handset.
L
You must set the remote fax activation to ON 
(feature #41 on page 71) beforehand.
L
Press {*}{#}{9} firmly.
L
The memory is filled with received 
documents due to a lack of recording paper 
or a recording paper jam. Install paper (page 
15) or c
lear the jammed paper (page 88).
The other party complains that they cannot 
send a document.
L
The memory is filled with received 
documents due to a lack of recording paper 
or a recording paper jam. Install paper (page 
15) or c
lear the jammed paper (page 88).
0519_FPG381.book  Page 86  Monday, May 19, 2003  6:46 PM