Pitney Bowes DA700 ユーザーズマニュアル

Clean print head, cartridge, ink surfaces and covers with 

plain water only. (Water works best!) 

Clean all rubber rollers with the Pitney Bowes Multi-Purpose 

Cleaning Kit Number 902-0. 

Use of any other cleaning solvents will void all warranties.
Keep petroleum based cleaning solvents away from rub-

ber or plastic parts. Anything but the recommended Pitney 

Bowes Cleaning Kit solvent could cause premature break-

down of the rubber compound.

The Pitney Bowes DA700/DA750 Ink Jet Printer is designed 

for trouble-free service with a minimal amount of care. You 

should schedule regular cleaning of the Feed Rollers, Exit 

Rollers and Lower Guide.

The print head performs a self cleaning cycle periodically. If 

print quality is unacceptable, try the following: 

•  Adjust the media thickness knob (page 3-18) to see if 

print quality improves. If the printhead is too high above 

the envelope, fuzzy printing results. If the knob is adjust-

ed too low, envelopes jam or print smears. 

•  From the Setup Menu, select 3. Purge Printhead. The 

purging process clears any clogged ink on the print noz-

zle. Often this returns the print quality to a normal level. 

See Appendix A, Control Panel Menus, for information 

on using this feature.•