Oce North America 6000 MICR+ line ユーザーズマニュアル

The following illustration shows the main system components. The table describes the main
components.

1

2

3

4

3

1

2

5

6

6

7

4

[1] The main system components

1

Operator panel

The operator panel helps you with your daily work, for
example the scheduling of the jobs. Furthermore, the
operator panel helps you solve errors or perform main-
tenance tasks.

2

Operator attention
light

The operator attention light enables you to check the
status of the system from a distance.

3

Roll feeder (optional)

A roll feeder is an optional device that adds paper input
capacity to your printer. When you use a roll feeder, you
can only use 1 or 2 paper modules. A combination of 3
paper modules and a roll feeder is not possible. The op-
erator panel displays the roll feeder and gives feedback
about the status of the roll feeder. For example whether
the roll is full or empty. Please refer to the documenta-
tion of the roll feeder manufacturer for more informa-
tion, for example about replacing an empty roll.

4

Paper module

The paper module contains 4 paper trays. The paper
trays contain the media that will be printed. The default
configuration of the system contains 1 paper module.
You can add 1 or 2 additional paper modules to the de-
fault configuration to increase the media input capacity.

5

Engine module

The engine module contains the components that print
the media. Access to the engine module is only required
when a paper jam occurs or when maintenance is re-
quired. The doors at the left-hand side and right-hand
side of the engine module give access to the toner units.

6

PrintGuard modules

The PrintGuard modules are required for MICR printing.
The PrintGuard modules postfuse the prints.

4