Xerox X2 ユーザーズマニュアル

 

There are many enhanced features for making copies that meet special 
needs.  The keys that control these features are on the right side of the 
Scanner Control Panel. 

To enable a feature, press the applicable key.  If the feature has an 
associated screen, that screen is displayed when the key is pressed.  If 
any settings are changed from the default state, the corresponding 
indicator lamp next to the key illuminates.  Pressing the C/CA key on the 
numeric keypad twice returns all settings for the feature to the default 
state and the corresponding indicator lamp is extinguished. 

When the settings for a feature are appropriately set, pressing the same 
feature key causes the changes to be accepted and the system returns 
to the READY state.  Pressing a different feature key while editing a 
setting is invalid and causes a beep.  Pressing a different feature key 
while not editing a setting causes the requested feature screen to be 
displayed. 

If a feature has no associated screen, pressing that feature key switches 
the feature on (enabled) or off (disabled).  When such a feature is 
enabled, the corresponding indicator lamp is illuminated. 

If the BEEP function (factory default) is enabled, a beep sound will be 
heard when a key is pressed.  If an improper key is pressed, a multiple 
beep sound will be heard. 

The illustration on the following page depicts the special features portion 
of the Scanner Control Panel.