Panasonic DP-C262 ユーザーズマニュアル
28
Chapter 3 Scanner Settings
Chapter 3
Scanner Settings
Setting the Scanning Quality
Documents, whether in Full Color or Monochrome, are scanned in three-colors.
z
Color mode settings are reset to their factory defaults when:
-The machine is turned Off.
-The Reset key is pressed.
-A scan job is completed.
-The machine is turned Off.
-The Reset key is pressed.
-A scan job is completed.
1
Select “Basic Menu”.
2
Set the desired scanning modes.
Quality Adjustment
Color Setting
1
Select the Color Mode, and then “OK”.
Quality Adj. (see page 28)
File Type and Name (see page 36)
(Continue from step 3)
(Continue from step 3)
Original Size:
From Platen Glass only.
When the original size is not correctly
detected, select “Original Size”, and then
select original size and touch “OK” on the
display.
When the original size is not correctly
detected, select “Original Size”, and then
select original size and touch “OK” on the
display.
2-Sided Original (see page 38)
Job Build and SADF (see page 39)
Multi-Size Feed:
When scanning mixed size originals, select
“Multi-Size Feed”.
“Multi-Size Feed”.
Ex: 8.5 x 11" and 11 x 17" size originals
Full Color Mode
Color Original
Three-colors
(Red, Green
and Blue)
(Red, Green
and Blue)
Grayscale Mode
Color Original
Grayscale
(Halftone)
(Halftone)
Black Mode
Color Original
Monochrome
(Bi-level)
(Bi-level)
Monochrome Original
Monochrome
(Bi-level)
(Bi-level)