Xerox 440 ユーザーズマニュアル

select this option if Line 1 is required.

select this option if Line 2 is required.

NOTE: Only 1 telephone line is available on the DC426/420.

After selecting one of the above options, or if only one 
telephone line is available, select Send or Receive to tell the 
machine the type of job. Enter the phone number and select 
Start.

NOTE: When both fax lines are installed but one is set to 
receive only, port (line) designation is not available. The 
selection of <1> or <2> will not be available in the dialing 
characters list.

The DC440/432/430/426/425/420 does not have a handset 
connected. It is On-hook as indicated on the touch screen. If an 
external telephone is connected, the machine will indicate Off-
hook when the handset is lifted from the telephone. If the 
recipient of the fax does not have a dedicated telephone line, 
use manual dialing.

Use the following options to dial a fax number manually:

used to send a fax.

used to enter the fax number that contains confidential 
numbers, for example a credit card number.

to receive a fax.

to switch between pulse and touch-tone dialing. 

Valid pulse mode, dialing characters are numbers 1 through 9 
and 0. Valid tone or Dual Tone Multi-Frequency (DTMF) mode 
characters are numbers 1 through 9, 0, * and #.

Dialing characters are different from the alphabet characters 
on the dialing keypad. They are available only through a 
special character keypad. Select the special character keypad 
from the touch screen.