Xerox 412 ユーザーズマニュアル

The drum cartridge is out of life.

Replace the drum cartridge. Refer 
to page 7-11.

The toner cartridge has run out. 
The machine stops.

Replace with a new toner 
cartridge. Refer to page 7-5.

The toner is almost empty.

Take out the toner cartridge and 
gently shake it. By doing this, you 
can temporarily re-establish 
printing operations.

The machine is waiting for the 
programmed interval to 
automatically redial.

You can press [Start] to 
immediately redial, or [Stop] to 
cancel the redial operation.

A problem with the fax 
communications has occurred. 

Try resending the fax.

You have tried to select a group 
location where only a single 
location number can be used, such 
as when adding locations for a 
multi-dial operation.

Try again, check location for group.

Your unit cannot connect with the 
remote machine, or has lost 
contact because of a problem on 
the phone line.

Try resending the fax. If failure 
persists, wait an hour or more for 
the line to clear then try again.

The memory has become full.

Either delete unnecessary 
documents, or retransmit after 
more memory becomes available. 
You can also split the transmission 
into more than one operation if it is 
a large job.

The remote machine was not 
answered after all the redial 
attempts.

Try resending the fax. Ensure the 
remote machine is functioning 
correctly.

The speed dial location you tried to 
use has no number assigned to it.

Dial the number manually with the 
numeric keypad or assign the 
number to a speed dial location.