Xerox 432 ユーザーズマニュアル

specified time. The job is then released automatically and 
placed at the end of the list of pending jobs in the Print 
Queue. The job is then formatted and printed as a normal 
job.

Jobs can be released either locally or remotely, prior to 
the specified time. To release a job, select the job in the 
Print Queue and select Release. The job will be placed 
at the end of the pending jobs in the Print Queue and 
processed normally.

- Secure Print— enables a password to be entered to 

protect a job. The job will be held in a queue and not 
printed until the same password is entered at the DC440/
432/430/426/425/420. 

To print the job, select the job in the Print Queue and 
press the Release button. The Secure Print Login pop-
up window prompts a password to be entered to release 
and print the job. If a time-out period is enabled and the 
job is not released during this time, the machine 
automatically deletes the job.

- Sample Print— enables users to print and proof a single 

copy of a document before printing the remaining 
document sets/copies. The remaining sets are held in the 
Document Centre print queue until the job is released via 
the Document Centre control panel. 

NOTE: When using this feature ensure that the Print dialog in 
the application does not provide a Collate option. If it does, 
turn the Collate option OFF in order for the Sample Set feature 
to work properly. If Collate is not turned OFF, the application 
may submit the entire job as a single document.

- Layout/Watermarks tab— used to change the layout of 

a document and add watermarks. For example, to display 
the word DRAFT or CONFIDENTIAL diagonally across 
each page. This feature also adjusts the size and 
placement of the watermark and enables the review of a 
sample page. In addition, documents can be printed 1 Up, 
2 Up and so on, up to 16 Up. Booklet Creation is also 
available from this screen.