Toshiba e-Studio 350 ユーザーズマニュアル
188
Printing Guide — Installing Client Software for UNIX
— Creating a Print Queue Using est4511add/estbwadd
You can create a print queue using est4511add/estbwadd.
Creating a print queue
1.
Log on to the root account.
2.
Enter the following command:
For e-STUDIO4511 Series
est4511add <queue name> <host name or IP address>
For e-STUDIO450 Series and e-STUDIO280 Series
estbwadd <queue name> <host name or IP address>
SUPPLEMENTS:
•
This command creates a print queue using the system’s lpadmin command. It also
creates a configuration file that has the destination IP address or host name. Use
the configuration file to change print queue parameters.
creates a configuration file that has the destination IP address or host name. Use
the configuration file to change print queue parameters.
•
The lpadmin command stores the printer interface file in the /etc/lp/interfaces direc-
tory in a file with the same name as the print queue. The configuration file is stored
in the /etc/lp/interfaces directory in a file named <queue name>.conf.
tory in a file with the same name as the print queue. The configuration file is stored
in the /etc/lp/interfaces directory in a file named <queue name>.conf.
•
Under Linux, the printtool (or equivalent) utility must be used to add the printer into
the lp printing system after executing the est4511add or est 450add command.
the lp printing system after executing the est4511add or est 450add command.
— Creating a Print Queue Manually
You can also configure the print queue by adding a remote printer manually.
The procedure varies depending on the operating systems.
The procedure varies depending on the operating systems.
Creating a print queue manually on Solaris
1.
Log on to the root account.
2.
Open your Linux/Unix editor.
3.
Create the following file.
/etc/lp/interfaces/<queue name>.conf
4.
Add a line as below in the <queue name>.conf.
dest=<IP address>
5.
Save the file.
6.
Enter the following command:
chmod +x <queue name>.conf