Toshiba 755 ユーザーズマニュアル
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 31
Clearing a Staple Jam
When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the procedure
below.
below.
Staple jam in the Finisher MJ-1027 / Saddle Stitch Finisher MJ-1028
1
Open the front cover of the finisher.
2
Lower the lever of the stapler to release the lock, and
then take out the staple cartridge.
then take out the staple cartridge.
3
Lower the guide while holding the knob.
Do not touch the stapling area (A in the figure).
The actual needle point could cause you personal injury.
The actual needle point could cause you personal injury.
4
Remove any jammed staples with something sharp.
1
2
A