Toshiba 170F ユーザーズマニュアル

If an abnormal condition arises
in the facsimile or an incorrect
operation is performed, an
alarm buzzer is generated for
about 4 seconds and a mes-
sage to indicate the nature of
the error appears in the LCD
window. In that case, take cor-
rective action according to the
following table.

Autodialer numbers and initial
settings have been lost (due to
a long period without power or a
depleted backup battery).

Press 

STOP

 to restore the idle

state. If this Error Message is
repeatedly displayed, machine
programming has become cor-
rupted. The machine must be
re-initiatized by a trained techni-
cian. Call for service.

A power failure occurred during
a communication, etc. The con-
tents of memory were cleared
due to a long power-off condi-
tion.

A Power Failure List is printed.
Confirm the list contents (see
page 203).

The RX cover is open or no
Toner Cartridge and Drum Unit
exists.

Firmly close the top cover or
install the Toner Cartridge and
Drum Unit.

The memory set aside for
speed dial numbers (i.e. One
Touch Keys and Abbreviated
Dial Numbers) has been ex-
hausted.

Delete unneed numbers, alter-
nate numbers, and unnecessary
pauses. Use shorter names for
the dialing addresses.

The maximum number of manu-
ally input phone numbers (100)
has been reached.

Split your transmission into two
or more jobs.

There is not enough memory to
perform the requested opera-
tion.

Press 

STOP

 to cancel the mes-

sage. Do the operation over
again with the Direct Document
Transmission, or do the opera-
tion again when enough residual
memory is regained.

A document jam has occurred.

Remove the jammed document
(see page 210).

A recording paper jam has oc-
curred or paper size is mis-
match.

Remove the jammed paper or
change the setting to select the
current paper size (see pages
21, 206, 211).

No paper exists in the upper pa-
per tray. This error occurs with
an optional paper tray installed.

Supply recording paper to the
upper paper tray.