Toshiba 170F ユーザーズマニュアル
223
LED TEST
Select the LED TEST
Menu
Menu
1
Press:
+
+
+
+
All the LEDs blink or light with
the following message dis-
played.
the following message dis-
played.
The LED test checks LED op-
eration by lighting all the LEDs
on the Operation Panel.
eration by lighting all the LEDs
on the Operation Panel.
Check the LCDs
2
Visually check that all the
LEDs are on. After checking,
LEDs are on. After checking,
press
STOP
.
Select the Test Result
Option
Option
3
Completed the
LED TEST
LED TEST
4
The word “OPERATION COM-
PLETED” is displayed on the
screen and the unit returns to
the individual test selection
screen.
PLETED” is displayed on the
screen and the unit returns to
the individual test selection
screen.
The result of the LED test can
be confirmed with the self test
report. To print the self test re-
port, refer to “PRINTING A
TEST” on page 230.
be confirmed with the self test
report. To print the self test re-
port, refer to “PRINTING A
TEST” on page 230.
If the result of the LED test is
judged to be NG, call your ser-
vice representative.
judged to be NG, call your ser-
vice representative.
LED TEST
[STOP] TO COMPLETED
MENU
If there was no input for 1
minute, Returns to display the
SETUP menu screen.
minute, Returns to display the
SETUP menu screen.
If all the LEDs turn on, press:
If even one LED is not lit,
press:
press:
2.NG
LED TEST
1.OK