Motorola MC9090-G ユーザーズマニュアル

1 - 8

MC9090-G RFID Integrator Guide Supplement

Press the red Power button to turn on the mobile computer. If the mobile computer does not power on, perform a 
cold boot. See 

.

When the mobile computer is powered on for the first time, it initializes its system. The Symbol splash screen 
(

) appears for a short period of time.

To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:

Using the stylus carefully press and briefly hold the tip of stylus on the center of each target that appears on the 
screen.

Repeat as the target moves around the screen or press ESC to cancel.

To check whether the main battery or backup battery in the mobile computer is charged, tap Start - Settings - 
System Tab - Power icon to display the Battery Status window.

To save battery power, set the mobile computer to turn off after a specified number of minutes.

When a battery is fully inserted in a mobile computer for the first time, upon the first power up, the device 
boots and powers on automatically.

To re-calibrate the screen at anytime, press the blue FUNC and ESC keys on the mobile computer to 
launch the calibration screen application.