Motorola LS3578 ユーザーズマニュアル

This chapter provides beeper and LED definitions, scanning techniques, general scanning instructions and tips, 
and decode zone diagrams.

The scanner emits different beeper sequences and patterns to indicate its status. 

 defines beep 

sequences that occur during both normal scanning and while programming the scanner.

Short low-short medium-short high beeps

Power up.

One short high beep

A bar code symbol was decoded (if decode beeper is enabled).

Four long low beeps

A communication error occurred while transmitting a scanned 
symbol to a host. The data is ignored. This occurs if the scanner is 
not properly configured or if the scanner has disconnected from 
the cradle.

Low beep

The scanner detects power when inserted into a cradle.

Note: This feature can be disabled.

Low-high-low-high beeps

Out of memory - the scanner cannot store the new bar code data.

The scanner was inserted in an incompatible/older cradle. 

Four short high beeps

Low battery indication.

Five long low beeps

Conversion or format error.

Short low-high beeps

Scanner has paired with the cradle.