Motorola LS3578 ユーザーズマニュアル

Radio Communications

4 - 3

When the scanner scans the pairing bar code it issues various beep sequences indicating successful or 
unsuccessful operations. See 

 for beep sequences that occur during pairing operations.

Authentication

Disable

Variable Pin Code

Static

Encryption

Disable

Short low-high beeps

Scanner has paired with the cradle.

Short high-low beeps

Scanner has unpaired with the cradle.

Note: When connected to a remote device using SPP or HID, if a 
disconnect beep sequence sounds immediately after scanning a 
bar code, check the host device to determine if it received the 
transmitted data. The scanner may have transmitted the last bar 
code scanned after losing the connection.

Long low-long high beeps

Unsuccessful pairing attempt. See 

.

Long low-long high-long low-long high 
beeps

Remote device rejected connection attempt, possibly due to an 
attempt to pair with a cradle that is already paired with the 
maximum number of scanners.

Four long low beeps

1.

A transmission error was detected in a scanned symbol. The 

data is ignored. This occurs if a unit is not properly configured. 
Check option setting.

2.

When communicating with a cradle, the cradle acknowledges 

receipt of data. If the acknowledgment is not received, this 
transmission error beep sequence sounds. Data may still have 
been received by the host. Check the host system for receipt of 
transmitted data. If data was not received by the host, re-scan the 
bar code.

Five high beeps

Emitted every 5 seconds while a reconnection attempt is in 
progress. See