Motorola LS3578 ユーザーズマニュアル

Radio Communications 4 - 21

When in multipoint-to-point mode, enable Parameter Broadcast to broadcast all parameter bar codes scanned to 
all other scanners in the piconet. If disabled, parameter bar codes are processed by the individual scanner only, 
and the scanner ignores parameters broadcast from other scanners or from the cradle.

Pairing is the process by which a scanner initiates communication with a cradle. Scanning Multipoint-to-Point 
activates multi scanner-to-cradle operation and allows up to three scanners to pair to one cradle. The cradle 
includes a pairing bar code.

To pair the scanner with the cradle, scan the pairing bar code on the cradle. A high/low/high/low beep sequence 
indicates that the pairing bar code was decoded. When a connection between the cradle and scanner is 
established, a low/high beep sounds.

1. The pairing bar code that connects the scanner to a cradle is unique to each cradle. 
2. Do not scan data or parameters until pairing completes.
3. When the scanner is paired to the cradle in SPP Master or Cradle Host mode, the scanner 
automatically tries to reconnect to a remote device when a disconnection occurs that is due to the radio 
losing communication. For more information see