Motorola LS3578 ユーザーズマニュアル

5 - 8

Symbol LS3578 Product Reference Guide

Scan one of the following bar codes to set the scanner’s trigger mode.

Upon trigger pull, an aiming dot appears for a programmable duration of time. After this time, the aiming dot turns 
into a standard laser scanning beam for a full decode session. The laser scanning beam stays on until the laser-on 
timeout occurs, a decode occurs, or the trigger is released. If the trigger is released before the aiming duration 
expires, the laser shuts off and no decode occurs.

Upon trigger pull, an aiming dot appears. This aiming dot remains while the trigger is pulled. When the trigger is 
released, the aiming dot turns into a standard laser scanning beam for a full decode session. The laser scanning 
beam stays on until the laser-on timeout occurs or a decode occurs. If the trigger is pulled again while in a decode 
session, the scanner beam returns to an aiming dot.

Upon trigger pull, an aiming dot appears. When the trigger is released, the aiming dot turns off. Pulling the trigger 
twice quickly turns on the standard laser scanning beam for a full decode session. The laser scanning beam stays 
on until the laser-on timeout occurs, a decode occurs, or the trigger is released.