Epson RX620 ユーザーズマニュアル

Solving Problems

■

If paper jams, turn off your Stylus Photo RX620, lift open the scanner section, 
and remove any paper that’s inside, including any small pieces that may have 
torn off. Carefully reload paper, turn the RX620 back on, and press the 
x

Color

 button.

Caution: 
Clear paper jams by pulling the paper out of the printer in the direction that it 
normally feeds through the printer (towards the output tray). Never pull the paper 
out backwards (in the direction of the sheet feeder). 

■

If paper jams frequently, make sure the left edge guide isn’t pushed too tightly 
against the paper. Also, try loading fewer sheets of paper. The stack should 
never be above the arrow on the inside of the left edge guide. Some paper 
types require that you load sheets individually, or you use a support sheet; 
follow the instructions that came with your paper for specific instructions.

■

If paper jams frequently, you may also have pushed the paper down too far 
into the sheet feeder. Turn the Stylus Photo RX620 off and carefully remove 
the paper. Then reload the paper.

 

■

Clean the print head; see page 58 for instructions.

■

Select the correct Type (Windows) or Media Type (Macintosh) setting in your 
printer software for the paper you loaded. If you’re copying without a 
computer, make sure you selected the correct paper type.

■

Select a higher print quality and turn off 

High Speed

 mode in your printer 

software.

■

Make sure the printable side of the paper is face up.