Epson C110 ユーザーズマニュアル

ChromaBlast

™

 Getting Started Guide for the EPSON Stylus C120/C110 

 

 

                                                

 

23 

RECOMMENDED APPLICATIONS 
White or light-colored fabrics in 100% cotton.   
 
PRINTING 
Print using the supplied ChromaBlast Driver program only.   

The print side of ChromaBlast media is opposite the ChromaBlast logo.   
For the Epson C120, place print side face up in the printer tray.   
 

Mirror Image: Check this box in the ChromaBlast Driver to ensure the 
image prints in reverse and that text appears correctly when image is 
transferred.  If your image is already reversed in your graphic program, 
leave this box unchecked. 
 

1.  If desired, you may trim the non-printed area before transferring, 

leaving .25 in. margin around the printed area. 

2.  Place garment on the heat press. Cover with ChromaBlast paper 

with image face down.   

3.  Press image according to proper pressure, heat, and time 

settings.   

4.  Peel the paper off the shirt while the shirt is still hot using an 

even motion.   

5.  Stretch the image area while the shirt is hot from both left to right 

and top to bottom to reduce the hand. 

 

Pressure:  Heavy.  If using a pneumatic press, set the pressure to 60 
psi. 
 
Temperature and Time:  350°F (176°C) for 45-60 seconds. 
Due to variations in cotton garments and in heat presses, time and 
temperature can be adjusted for preferred performance up to 400°F for 
25 seconds.  Some scorching may occur, but will wash out.   
 
STORAGE INSTRUCTIONS 
Store ChromaBlast media in a cool, dry area within the provided plastic 
storage bag.  Do not remove from carton until ready to use.