DELL E525w ユーザーズマニュアル
Copying
189
18
Copying
NOTE:
If the Function Enabled setting for
COPY
is set to
On(Password)
, you need to enter the four digit password to use
the copy function. If the Function Enabled setting for
COPY
is set to
Off
, the copy function is disabled. For details, see
Loading Paper for Copying
The instructions for loading print documents are the same whether you are printing, faxing, or copying. For more
Preparing a Document
You can use the document glass or the Automatic Document Feeder (ADF) to load an original document for
copying, scanning and sending a fax. You can load up to 15 sheets of 75 g/m
2
(20 lb) documents for one job using the
ADF or one sheet at a time using the document glass.
WARNING:
Avoid loading documents that are smaller than 5.83 in. by 8.27 in. (148.0 mm by 210.0 mm) or larger than 8.5 in. by
14 in. (215.9 mm by 355.6 mm), different sizes or weights together, or booklets, pamphlets, transparencies, or documents having
other unusual characteristics in ADF.
other unusual characteristics in ADF.
WARNING:
Carbon-paper or carbon-backed paper, coated paper, onion skin or thin paper, wrinkled or creased paper, curled
or rolled paper or torn paper cannot be used in ADF.
WARNING:
Do not use the documents with staples, paper clips or exposed to adhesives or solvent based materials such as
glue, ink and correcting fluid in ADF.
NOTE:
To get the best scan quality, especially for color or grayscale images, use the document glass instead of the ADF.
Making Copies From the Document Glass
NOTE:
A computer connection is not required for copying.
NOTE:
Ensure that no document is in the ADF. If any document is detected in the ADF, it takes priority over the document on the
document glass.
NOTE:
Contaminants on the document glass may cause black spots on the printed paper. For best results, clean the document
glass before use. For more information, see "Cleaning the Scanner" on page 272.