DELL E525w ユーザーズマニュアル
Troubleshooting
295
Ghosting
Action
Yes
No
1
Adjust the transfer bias.
a
Launch the Tool Box, and click Registration Adjustment on the
Printer Maintenance tab.
b
Click Chart Print.
c
Click Ghost Configuration Chart.
The ghost configuration chart is printed.
d
Click Adjust Transfer Roller.
e
Select the Transfer Roller Refresh Mode check box, and then click
Apply New Settings.
f
Click Registration Adjustment on the Printer Maintenance tab.
g
Click Chart Print.
h
Click Ghost Configuration Chart.
The ghost configuration chart is printed.
The ghost configuration chart is printed.
Is the problem recovered?
The task is complete.
Go to action 2.
2
The print media surface may be uneven. Try changing the Paper Type
setting in the printer driver. For example, change the plain paper to
thick.
a
On the General or Paper/Output tab in Printing Preferences of the
printer driver, change the
Paper Type setting.
Is the problem recovered?
The task is complete.
Go to action 3.
3
Adjust the fusing unit temperature.
a
Launch the Tool Box, and click Adjust Fusing Unit on the Printer
Maintenance tab.
b
Adjust the fixing temperature by turning up the value for your
printing media.
c
Click Apply New Settings.
Is the problem recovered?
The task is complete.
Go to action 4.
4
If you use non-recommended print media, use the print media
recommended for the printer.
Is the problem recovered?
Is the problem recovered?
The task is complete.
Contact Dell.