DELL E525w ユーザーズマニュアル

Connecting Your Printer

Connect the Ethernet cable only when you need to setup a wired connection.

Following are the specifications for a wireless setup:

You can select a method to configure a wireless setting from the following:

Connecting to the network via Ethernet cable disables wireless setting.

Connectivity

Wireless

Connectivity standard

IEEE 802.11b/g/n compliant

Bandwidth

2.4 GHz

Data transfer rate

IEEE 802.11b mode: 11, 5.5, 2, 1 Mbps
IEEE 802.11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
IEEE 802.11n mode: 65 Mbps

Security

64 (40-bit key)/128 (104-bit key) WEP, WPA-PSK (AES), WPA2-PSK (AES)(IEEE 802.1x 

attestation function of WPA 1x non-corresponds), Mixed Mode PSK

Wi-Fi Protected Setup

®

(WPS)

*1

Push Button Configuration (PBC), Personal Identification Number (PIN)

*1

WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed Mode PSK, WPA-PSK AES, WPA2-PSK 
AES, Open (No Security)

WPS-PBC (Wi-Fi | WPS Button)

*1

WPS-PBC (Operator Panel Menu)

*1

WPS-PIN

*2

Auto SSID Setup
Manual SSID Setup

*1

WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required for wireless 
configuration, by starting WPS-PBC on the printer with the 

 (Wi-Fi | WPS) button or operator panel menu, and then pressing the 

button provided on the wireless LAN access point (Registrar) or router. This setting is available only when the access point supports 
WPS-PBC.

*2

WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required for wire-
less configuration, by entering PIN assignments in the printer and computer. This setting, performed through access point, is available 
only when the access points of your wireless router supports WPS.