DELL E525w ユーザーズマニュアル

ページ / 314
Dell™ Printer Configuration Web Tool
85
Printer Settings
Use this menu to display the Printer Settings Report and to configure the printer settings.
The following tabbed pages are displayed at the top of the right frame.
Printer Settings Report
This tab contains the Menu Settings and Reports pages.
Menu Settings
Displays the current settings of the printer menus.
Reports
Purpose:
To print the settings and history information of your printer.
Values:
Printer Settings
This tab contains the System SettingsUSB SettingsPCL SettingsPostScript SettingsPDF SettingsSecure 
SettingsCopy DefaultsCopy Color BalanceCopy SettingsScan DefaultsUSB Direct Print DefaultsFax 
Defaults, and Fax Settings pages.
System Settings
Purpose:
To configure the basic printer settings.
Values:
System Settings
Click Start to print the system settings page.
Panel Settings
Click Start to print the panel settings page.
PCL Fonts List
Click Start to print the PCL fonts list.
PS Fonts List
Click Start to print the PS fonts list.
Job History
Click Start to print the job history report.
Error History
Click Start to print the error history report.
Protocol Monitor
Click Start to print the protocol monitor report.
Address Book
Click Start to print the address book report.
Color Test Page
Click Start to print the color test page.
Fax Activity
Click Start to print the fax activity report.
Stored Documents
Click Start to print the stored documents list.
Power Saver Timer - Sleep
*1
Specifies the time taken by the printer before it enters the power saver timer mode 1 after it 
finishes a job.
Power Saver Timer - Deep 
Sleep
Specifies the time taken by the printer before it enters the power saver timer mode 2 after it goes 
into the power saver timer mode 1.
Auto Reset
Specifies the time taken by the printer before it automatically resets the settings for Copy, Scan, or 
Fax on the operator panel to the defaults when no additional settings are made.
Panel Select Tone
Sets the volume of the tone that is emitted when the operator panel input is correct, or disables 
the tone.