Canon 5075 ユーザーズマニュアル

System Configuration

Option

al Equi

pment

a Copy Tray-L1

The Copy Tray-L1 is equipped with the following 
features: Collate, Group, and Rotate.

b Card Reader-C1

The Card Reader-C1 enables Department ID 
Management to be performed with the control 
cards.

c Paper Deck-AD1/Paper Deck-AE1

The Paper Deck-AD1/Paper Deck-AE1 provides 
an additional source of paper for printing jobs.

The Paper Deck-AD1/Paper Deck-AE1 holds up 
to 3,500 sheets of paper (20 lb bond (80 g/m

2

)).

d Document Insertion/Folding Unit-F1/

If the Document Insertion/Folding Unit-F1 or 
Document Insertion Unit-E1 is attached to an 
optional finisher, you can insert covers into 
documents. If the Document Insertion/Folding 
Unit-F1 is attached, you can also perform 
C-folding and Z-folding.

e Puncher Unit-AT1

The Puncher Unit-AT1 is equipped with the Hole 
Punch mode. The Puncher Unit-AT1 can be 
attached only if the optional Finisher-AD1 or 
Saddle Finisher-AD2 is attached.

f Staple Cartridge-D2

The Staple Cartridge-D2 can be attached to the 
optional Saddle Finisher-AD2 for saddle 
stitching.

g Staple-J1

The Staple-J1 can be attached to the optional 
finisher for stapling (Corner and Double).

h Saddle Finisher-AD2

The Saddle Finisher-AD2 is equipped with the 
following features: Collate, Group, Offset, and 
Staple (Corner, Double, and Saddle Stitch).

i Finisher-AD1

The Finisher-AD1 is equipped with the following 
features: Collate, Group, Offset, and Staple 
(Corner and Double).

NOTE

 

•

Only one optional finisher can be attached to the main unit at a time.

•

The Copy Tray-L1 can be attached to the machine only if no optional finisher is attached.