Citizen CL-E700 Series ユーザーズマニュアル
20
Chapter 1 Setup
Connection to Power
1. Check that the power switch to the printer is turned OFF.
2. Connect the connector of the power cord to the power cord
2. Connect the connector of the power cord to the power cord
inlet on the printer.
3. Insert the plug of the power cord in the AC outlet.
Power Cord Inlet
AC Outlet
Driver Installation
The computer may automatically detect the presence of the new printer
when it is first started, depending on the computer type, interface and
operating system. Follow any on-screen instruction and also instructions
supplied with any additional CD-ROM disk included with your printer.
Your supplier will assist you with the correct drivers and software which
are compatible with your particular computer system.
when it is first started, depending on the computer type, interface and
operating system. Follow any on-screen instruction and also instructions
supplied with any additional CD-ROM disk included with your printer.
Your supplier will assist you with the correct drivers and software which
are compatible with your particular computer system.
Use an AC outlet that accepts a three-pronged plug. Otherwise,
static electricity may be generated and there will be danger of
electric shock.
static electricity may be generated and there will be danger of
electric shock.
Caution