Citizen CL-E700 Series ユーザーズマニュアル

23

4

3

2

1

1

 MENU key: Performs selection of Menu Setup Mode and re-printing

 • In normal operation, this key will enter the Menu Setup Mode
 • The last label can be reprinted by pressing the MENU key in Normal 

operating mode. Printing of the final label is performed based on 
the setting of “Menu Key Action” in “After Print” menu. 
If MENU key has been set to re-print, press the menu key for at least 
4 seconds to shift to Menu Setup Mode.

2

 • Pressing this key feeds media to the print start position. The 

distance it is fed is determined by automatically detecting the front 
end of the media when using label media, and when continuous 
media has been designated, a fixed quantity is fed, then feeding 
stops.

 • When the TEAR OFF setting is effective, feeding stops when the 

media has been fed to the TEAR OFF location.

 • When the optional cutter unit is installed, the media is fed to the cut 

position then it is cut.

 • If the optional peeler unit is installed, the media is fed to the peeling 

location. When the media is pausing at the peeling position, feeding 
does not occur, even if the Feed key is pushed.

3

 • Pushing this key once during printing puts the printer in pause 

mode after the label is issued. It is possible to cancel 1 batch of label 
issuing data by pressing the Stop key for 4 seconds or longer in 
pause status. (The LCD indicates “Job Clear” during cancel.)

4

 • When this key is pushed once, the LCD indicates “Pause” and the 

printer temporarily pauses.

 • When it is pushed during printing, the printer pauses after the label 

currently being printed is issued. Pressing the key a second time 
restarts printing and the remaining number of designated labels are 
printed.