Citizen CL-E700 Series ユーザーズマニュアル

59

It may be necessary to adjust the printer according to the thickness of 
the media being used. This can be done easily by rotating the media 
adjustment dial to improve the print quality.
•  Poor print quality across the complete printout means wrongly set 

media thickness. See this section.

•  Poor print quality on one side of a printout means wrongly set media 

width. See next section.

Adjust while performing test printing by turning the dial from the 
smallest number on the dial to the largest number on the dial one step at 
a time.

Adjust while performing test printing by turning the dial from the 
smallest number on the dial to the largest number on the dial one step at 
a time.

Media thickness adjustment dial

0

Direct thermal media (thin media)

1-2

Standard Label media, Direct thermal media

3-5

Thicker backing paper labels

6-9

Cards, tags, thicker media stock.

These values are guidelines. The exact media being used must be 
matched with the correct media thickness adjustment position.
•  When shipped from the factory, it is set at dial 1 or 2. 

(The factory default setting is indicated on the adjustment gauge label.)

•  The offset adjustment varies according to the thickness and the 

hardness of the media.

•  Dial adjustment may be required depending on the thickness of print 

and occurrence of ribbon wrinkles.