ColorVision c2630 ユーザーズマニュアル

In addition to additional drawers [cassettes] that are the same as 
the one equipped as standard, you can also add 11x8

1/2

", A4 or 

B5-size drawers up to a total capacity of 3000 sheets (one 500-sheet 
built-in drawer [cassette]). 
Paper loading procedures for the 500-sheet drawer [cassette] are 
the same as those for the standard drawer (page 3-1). 
* Use right cover 3 to clear paper jam.
* Casters are attached to the bottom of the Paper Feeder.
* B5 is for Asia-Pacific specification copiers only.

Pull out the drawer [cassette] as far as it will go. 

Do not pull multiple drawers [cassettes] out at the same 
time.

Load the paper, aligning it along the right side of the 
drawer [cassette]. 

• When loading paper, make sure there is no creasing or 

any other abnormality that can cause a paper jam. 

• A  sticker  (1) is provided inside the drawer [cassette] to 

indicate the maximum allowable level. The surface of 
the paper stack should not be higher than the indicated 
level. 

• When you are loading paper into a drawer [Cassette], 

make sure that the side facing downward when the 
package is opened is the side that is facing upward in 
the drawer [cassette] as well.

CAUTION

To prevent the possibility of accidents due to tilting 

the copier body, always turn the desk’s stopper 

bolts until they make firm contact with the floor 

during initial installation or whenever the machine 

is moved.