ColorVision c2630 ユーザーズマニュアル
Section 9 TROUBLESHOOTING
9-5
If a paper misfeed occurs, a message will be displayed in the touch
panel about the misfeed and copying will stop. Leave the power
switch ON ( | ) and refer to “Clearing paper jams” on page 9-6 to
remove the jammed paper.
panel about the misfeed and copying will stop. Leave the power
switch ON ( | ) and refer to “Clearing paper jams” on page 9-6 to
remove the jammed paper.
Inch specifications
Metric specifications
Cautions
* Do not reuse misfed paper.
* If paper is torn during removal, be sure to remove any loose
* If paper is torn during removal, be sure to remove any loose
scraps of paper from inside the copier. Loose scraps inside the
copier could cause another misfeed later.
copier could cause another misfeed later.
* Once misfed paper has been removed, warm-up will begin. The
misfeed indications will disappear, and the copier will return to
the same settings prior to the misfeed.
the same settings prior to the misfeed.
* If a misfeed occurs in the optional Document Finisher, do not add
the misfed copy to the other copies in the Document Finisher
tray, as that copy will be automatically made again.
tray, as that copy will be automatically made again.
* When a misfeed occurs, if the power switch is turned OFF (O)
without removing the jammed paper, a message about the
misfeed and “J00” will be displayed the next time the power
switch is turned ON ( | ) again.
In such a case, follow the procedure displayed on the touch panel
to remove the jammed paper.
misfeed and “J00” will be displayed the next time the power
switch is turned ON ( | ) again.
In such a case, follow the procedure displayed on the touch panel
to remove the jammed paper.
Misfeed location indicators
(1) Misfeed in the paper feed section (Page 9-6.)
(2) Misfeed in the paper conveyor unit (Page 9-11.)
(3) Misfeed in the fixing section (Page 9-12.)
(4) Misfeed inside the left cover (Page 9-14.)
(5) Misfeed in the Duplex Unit (Duplex copiers only)
(2) Misfeed in the paper conveyor unit (Page 9-11.)
(3) Misfeed in the fixing section (Page 9-12.)
(4) Misfeed inside the left cover (Page 9-14.)
(5) Misfeed in the Duplex Unit (Duplex copiers only)
(6) Misfeed in the optional Document Processor
(7) Misfeed in the optional Document Finisher (Page 9-17.)
If paper jams
WARNING
High voltage is present in the charger section.
Take sufficient care when working in this area, as
there is a danger of electrical shock.
CAUTION
The copier’s fuser unit is extremely hot. Take
sufficient care when working in this area, as there
is a danger of getting burned.
Paper misfeed.
JAM 00
1. Open Right Side Cover of drawer 2.
Remove paper if inside.
2. Pull out drawer 1.
3. Remove paper.
4. Close paper drawer.
3. Remove paper.
4. Close paper drawer.
Close Cover.
Paper misfeed.
JAM 00
1. Open right cover 2.
Remove paper if inside.
2. Pull out paper cassette 1.
3. Remove paper.
4. Close paper cassette.
3. Remove paper.
4. Close paper cassette.
Close cover.
Paper misfeed.
JAM 00
1. Open Right Side Cover of drawer 2.
Remove paper if inside.
2. Pull out drawer 1.
3. Remove paper.
4. Close paper drawer.
3. Remove paper.
4. Close paper drawer.
Close Cover.